Description
Description
The Lezyne Clik Drive HV is a compact high-volume hand pump for mountain bike and gravel tyres running Clik Valve cores. The CNC-machined aluminium pump weighs 94 g, measures 162 mm long and reaches 6.2 bar (90 psi). A flex hose with a bleed valve pushes straight onto a Clik Valve, with no threading or clamping.
What the Clik Drive HV is for
HV stands for high volume. Lezyne builds this version for mountain and gravel bikes and caps it at 6.2 bar (90 psi). If you run road or triathlon tyres at higher pressures, the sister Clik Drive HP is the one Lezyne rates to 160 psi.
How the Clik connection works
There is no thread to wind on and no clamp to set. The chuck at the end of the flex hose closes around a Clik Valve as you push it on and seals itself, and it comes off with a straight pull. Lezyne describes the connection as higher-flow than a standard one. The hose also carries a bleed valve: air moves both ways once the pump is attached, so you can drop a few psi without unhooking.
Valve compatibility
Lezyne lists Clik as this pump's only compatibility. Presta and Schrader are not on that list. Lezyne says Clik Valve can be retrofitted to the presta-style valves on most modern bikes, and its Clik range includes Schwalbe Clik Valve Cores and Clik TLR valves.
Build and carry
- CNC-machined aluminium body with a rebuildable design
- 94 g, 162 × 30 × 30 mm
- Composite Matrix frame mount included
What it does not do
The Clik Drive HV has no pressure gauge, it does not go past 90 psi, and Lezyne does not list it for Presta or Schrader valves. If any of those matter for your setup, it is the wrong pump.
Specifications
Specifications
-
Material
-
Weight
-
Connector Type
-
Compatibility
-
Maximum PSI
-
Length
